C2g 29596 WIRELESS USB TO VGA AND AUDIO KIT Bedienungsanleitung

1 USER GUIDE WIRELESS USB TO VGA AND AUDIO KIT Model: 29596

9 IMPORTANT NOTE: • If installing on Windows XP, Service Pack 3 (SP3) is required. Verify that this has been installed before installing the Wirel

10 This will take you to the TruLink Wireless USB to VGA and Audio Kit InstallShield Wizard. Click “Next” to go to proceed with the install.

11 Read and accept the License Agreement for the DisplayLink software. After the software installs, your installation is complete and

12 STEP 2A – DEVICE INSTALLATION FOR THE WIRELESS VGA DEVICE ADAPTER 1. Connect one of the dipole antennas to the Wireless VGA Device Adapter. 2. Po

13 STEP 2B-CONNECT THE WIRELESS AUDIO DEVICE ADAPTER 1. Connect another dipole antenna to the Wireless Audio Device Adapter. 2. Connect the Wireles

14 STEP 3 -DRIVER INSTALLATION FOR THE WIRELESS USB HOST ADAPTER Your Wireless USB to VGA and Audio Kit has been pre-associated for you, meaning th

15 After you connect the Wireless USB Host Adapter to your computer, Windows will automatically install it and you should get a successful

16 The Wireless USB Host Adapter will search for the Wireless VGA and Audio Device Adapters. When association is confirmed between the devices, the A

17 Note: The default setting extends your desktop to the right so you should see the desktop background on the wireless display device, but you will

18 WIRELESS VGA DISPLAY SETTINGS The TruLink Wireless VGA Device Adapter hosts a number of various settings so that you may configure your image to

1 Introduction...

19 NOTE: By default, your monitor will be set for the best resolution and will extend your screen to the right. Figure: Display S

20 MENU DESCRIPTIONS Screen Resolution This allows adjustment for your video’s display capable screen resolutions. Please note that if all the optio

21 Advanced... This will allow you to go into the Display Properties settings and make adjustments to your display settings. WIRELESS USB HOST ADA

22 Wireless VGA Device Adapter Reset To erase all Wireless USB Host Adapters associated to your Wireless VGA Device Adapter, hold down the “RESET” but

23 Wireless USB Manager The Wireless USB Manager is simple and easy to use interface to manage your Wireless USB devices and control your Wireless USB

24 The VIEW menu will give the option of what type of devices you wish to display (All Devices, Connected Devices and Not Connected Devices). The OPT

25 Figure: Host Settings - General To manage the Wireless USB Host Adapter settings, either select “Host Settings” in the “Option” menu of the Wireles

26 Figure: Host Settings - Advanced ADVANCED TAB (Figure: Host Settings – Advanced) 1. Channel selection: this function allows you to set manually a

27 1. Why can’t I install .NET? You may have an older version of .NET, preventing the newer one from being installed. Using Add/Remove Programs or

28 Still not connected? Try adjusting the resolution from the TruLink DisplayLink manager. Some displays such as television type displays can be reco

2 Thank you for purchasing the TruLink™ Wireless USB to VGA and Audio Kit. This product utilizes the latest in wireless technology, so you can displ

29 setup will not allow use of the original display. We recommend using a DVD based playback software if possible (i.e. PowerDVD, WinDVD) as these p

30 1. We only recommend playing back video in “Extend” mode. 2. Don’t switch between “Mirror” and “Extended” modes while video is being played o

31 Systems Information Operating System Support: Microsoft XP 32-bit; Microsoft Vista 32-bit/64-bit Operating Range: Up to 30 feet (10 meters) P

32 At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience

33 ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this man

34 ASSOCIATION WITH OTHER DEVICES ASSOCIATION CONCEPT In order to establish a secure wireless connection, both your Wireless USB Host Adapter and t

35 Figure: Cable AssociationCABLE ASSOCIATION PROCEDURE Cable association steps. Examples/Figures shown are used with the association of the TruLin

36 Figure: TruLink Wireless VGA and Audio Device Adapter Connected Associated Certified Wireless USB Devices will appear as icons in the Wireless USB

37 Figure: Discovery Mode Screen PIN ASSOCIATION PROCEDURE PIN association steps: Examples/Figures shown are used with the association of the TruLin

38 Figure: Discovery Mode in Process Figure: Pin Association Entry 2. The Wireless USB Host Adapter will search for the Wireless VGA Device Adapter w

3  In-room wireless connectivity up to 30 feet  Conversion from USB format to UXGA/WSXGA video and two-channel stereo audio  Video streaming up

39 4. Enter the PIN of the Wireless VGA Device Adapter (4-digit PIN) and click Accept Association. The Wireless VGA Device Adapter and Wireless USB

40 3. Make sure the WIRELESS/WIRED switch on your Wireless VGA Device Adapter is in the WIRELESS position and the power cable is plugged in your Wi

41 4. Click Install this driver software anyway. 5. To change pin, click “Change PIN” APPENDIX

42 6. Enter a 4-Digit PIN (0-9) and click OK. 7. If your PIN is valid, a window displaying your new PIN will appear. Press OK. Your PIN

43

44 For more information on this product or to check for updated drivers, manuals or frequently asked questions

4  Microsoft® Windows® XP 32-bit with Service Pack 3 or higher  or Microsoft® Vista® 32-bit/64-bit SYSTEM REQUIREMENTS

5  Wireless USB Host Adapter for your computer  Wireless VGA Device Adapter for your display  Wireless Audio Device Adapter for your audio device

6 1 2 WIRELESS USB HOST ADAPTER 1. Link: Data Connection Indicator • LED is solid when transfer device is connected • LED blinks when data is bein

7 51234 6 87 WIRELESS VGA DEVICE ADAPTER 1. VGA : VGA Activity Indicator • LED is solid when display cable is connected. • LED is blinking when dat

8 52 WIRELESS AUDIO DEVICE ADAPTER 1. Activity Indicator • LED is solid when display cable is connected. • LED is blinking when data is being tran